Mitsubishi Electric MELSEC iQ-R Series User Manual page 123

Error code Error name
4123H File related error
4124H File related error
4125H File related error
4126H File related error
4127H File related error
4128H File related error
4129H File related error
412AH File related error
412BH File related error
412CH File related error
412DH File related error
412EH File related error
412FH File related error
4130H File related error
4131H File related error
4132H File related error
4133H File related error
4134H File related error
4135H File related error
4136H File related error
4137H File related error
4138H File related error
4139H File related error
413AH File related error
413BH File related error
413CH File related error
413DH File related error
413EH File related error
413FH File related error
414CH Intelligent function module
specification error
4150H File related error
4151H File related error
Error details and cause
The specified drive (memory) is abnormal.
The specified drive (memory) is abnormal.
The specified drive (memory) or file is performing
processing.
The specified drive (memory) or file is performing
processing.
File password mismatch
File password mismatch with copy destination
The request cannot be executed since the specified
drive (memory) is ROM.
The request cannot be executed since the specified
drive (memory) is ROM.
The specified drive (memory) is write-inhibited.
The specified drive (memory) is write-inhibited.
The specified drive (memory) does not have enough
free space.
The specified drive (memory) does not have enough
free space.
The drive (memory) capacity differs between the
drive (memory) copy destination and copy source.
The drive (memory) type differs between the drive
(memory) copy destination and copy source.
The file name of the file copy destination is the same
as that of the copy source.
The specified number of files does not exist.
The specified drive (memory) has no free space.
The attribute specification data of the file is wrong.
The date/time data of the engineering tool (personal
computer) is out of range.
The specified file already exists.
The specified file is read-only.
Simultaneously accessible files exceeded the
maximum.
The size of the specified file has exceeded that of
the existing file.
The specified file has exceeded the already existing
file size.
The same file was simultaneously accessed from
different engineering tools.
The specified file is write-inhibited.
The specified file capacity cannot be secured.
Operation is disabled for the specified drive
(memory).
The file is inhibited to be written to the file storage
area.
The specified buffer memory address cannot be
accessed.
An attempt was made to initialize the drive (memory)
protected by the system.
An attempt was made to delete the file/folder
protected by the system.
Action
Initialize the memory, and restore the drive (memory)
to its normal state.
Initialize the memory, and restore the drive (memory)
to its normal state.
Execute again after a while.
Execute again after a while.
Execute again after checking the file password.
Execute again after checking the file password.
Execute again after changing the target drive
(memory).
Execute again after changing the target drive
(memory).
Execute again after changing the write inhibit
condition or drive (memory).
Execute again after changing the write inhibit
condition or drive (memory).
Execute again after increasing the free space of the
drive (memory).
Execute again after increasing the free space of the
drive (memory).
Execute again after checking the drive (memory)
copy destination and copy source.
Execute again after checking the drive (memory)
copy destination and copy source.
Execute again after checking the file names.
Execute again after checking the specified data.
Execute again after increasing the free space of the
drive (memory).
Execute again after checking the specified data.
Execute again after checking the clock setting of the
engineering tool (personal computer).
Execute again after checking the specified file name.
Execute again after changing the condition of the
specified file.
Execute again after decreasing file operations.
Execute again after checking the size of the
specified file.
Execute again after checking the size of the
specified file.
Execute again after a while.
Execute again after changing the file condition.
Execute again after increasing the capacity of the
specified drive (memory).
Execute again after changing the target drive
(memory).
Execute again after changing the specified drive
(memory).
Execute again after checking the buffer address.
Do not initialize the target drive (memory) as it
cannot be initialized.
Do not delete the target file as it cannot be deleted.
4 TROUBLESHOOTING
4.7 Error Codes
4
121