Chapter 2 Parameter Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

2
PARAMETER SETTINGS
This chapter describes CPU parameters of the remote head module and module parameters of the module mounted on the
remote head module.
2.1
CPU Parameters
This section describes details on CPU parameters together with their setting windows.
[Navigation window]  [Parameter]  [RJ72GF15-T2]  [CPU Parameter]
Item
Name Setting
Operation Related
Setting
RAS Setting
Network Required
Setting
Network Application
Setting
• The remote head module does not employ static routing. However, it supports dynamic routing.
• Use a master station for the routing setting to communicate with other network by using static routing. The
remote head module communicates based on the routing setting of the master station.
2 PARAMETER SETTINGS
76
2.1 CPU Parameters
Description
Set titles and comments for the remote head module.
Set remote reset for the remote head module.
Set parameters for the RAS function.
Set network numbers and station numbers for the remote head module.
Set module operation mode, transfer between devices, and redundancy for the remote head
module.
Reference
Page 77 Name Setting
Page 78 Operation Related
Setting
Page 79 RAS Setting
Page 80 Network Required
Setting
Page 81 Network Application
Setting