ABB COM600 3.4 User Manual page 73

1MRS755382 Station Automation COM600 3.4
IEC 60870-5-101 Slave (OPC) User's Manual
<49> :=Set point command, scaled value
<50> :=Set point command, short float point
value
<51> :=Bitstring of 32 bit
<131> :=Parameter byte string
<133> :=101 Encapsulated SPA bus message
System information in monitor direction (station-specific parameter)
<70> :=End of initialization
System information in control direction (station-specific parameter)
<100> :=Interrogation command
<101> :=Counter interrogation command
<102> :=Read command
<103> :=Clock synchronization command
<104> :=Test command
<105> :=Reset process command
<106> :=Delay of acquisition command
Parameter in control direction (station-specific parameter)
<110> :=Parameter of measured value, normalized value
<111> :=Parameter of measured value, scaled value
<112> :=Parameter of measured value, short floating point
value
<113> :=Parameter activation
File Transfer (station-specific parameter)
<120> :=File ready
<121> :=Section ready
<122> :=Call directory, select file, call file, call
section
<123> :=Last section, last segment
C_SC_NB_1
C_SC_NC_1
C_BO_NA_1
C_SR_NA_1
C_SB_NA_1
M_EI_NA_1
C_IC_NA_1
C_CI_NA_1
C_RD_NA_1
C_CS_NA_1
C_TS_NB_1
C_RP_NC_1
C_CD_NA_1
P_ME_NA_1
P_ME_NB_1
P_ME_NC_1
P_AC_NA_1
F_FR_NA_1
F_SR_NA_1
F_SC_NA_1
F_LS_NA_1
73