Table of Contents
Advertisement
3.
3.1.
3.2.
14
Station Automation COM600 3.4
IEC 60870-5-101 Slave (OPC) User's Manual
Configuration
About this section
This section guides you in the configuration tasks required before you can start using
the IEC101 Slave OPC Client. For information on the IEC 61850 data modeling, refer
to COM600 User's Manual.
Start Station Automation Builder 600 (later referred to as SAB600) to open a project
where at least one OPC server has been configured. You can also open and name a new
project, where you configure at least one OPC server.
1. Select File > Open/Manage Project....
2. In the Open/Manage Project dialog, select the required location for the project:
•
Projects on my computer
•
Projects on network
3. Select New Project on the left.
•
Enter a Project Name. The Description is optional.
4. Click Create.
5. Click Open Project.
Overview of configuration
Before you can start using the IEC101 Slave OPC Client, you need to build and configure
an object tree in SAB600 to define the Communication structure within the Gateway
object.
•
IEC101 Slave OPC Client
•
IEC101 OPC Balanced Channel
•
IEC101 OPC Unbalanced Channel
•
IEC101 Device (IEC101 IED)
•
Data objects
Figure 3.2-1 shows an example view of SAB600 including an object tree in the commu-
nication structure on the left and Object Properties window displaying the object properties
on the right.
When configuring OPC servers the following characters cannot
be used in object names: \ ` ' ' #
1MRS755382
Advertisement
Table of Contents
