5. Connect ground to terminal
below at right using a screwdriver.
6. Mount power supply protection cover and fasten protection cover screw.
7. Tighten cable gland.
5.2.2.10
Finishing the transmitter connection
Connection check-up
1. Check individual wire installation by tugging firmly.
2. Firmly tighten cable glands and insert blanking plugs in unused cable entries.
3. Close lid.
4. Tighten the four spring screws.
5. Ensure that moisture does not penetrate to inside of electronics enclosure.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
①
L/
+
②
N/
-
③
Protective Earth (PE)
AC connection
Power: 100 to 240 V AC, 47 to 63 Hz
and power to terminals L/+ and N/- in the manner shown
Connecting
5.2 Connecting FC430
DC connection
Power: 19.2 to 28.8 V DC
85