Connecting
5.3 Wiring information
Your device is now ready for commissioning.
5.3
Wiring information
5.3.1
Wiring in hazardous areas
Hazardous area applications
Special requirements apply to the location and interconnection of sensor and transmitter. See
Installation in hazardous areas (Page 20).
Transmitter housing
Before opening the terminal box check that:
● No explosion hazard exists
● All connection leads are potential free
Wiring tool
Use the wiring tool for connecting the cables in the compact housing transmitter.
The wiring tool is located in the application terminal compartment.
Figure 5-4
86
WARNING
Wiring tool location
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA