E.5 Inputs And Outputs - Siemens SITRANS FC430 Operating Instructions Manual

E.5 Inputs and outputs
Table E-10 Channel 1 – output with HART
HMI menu ID Parameter
2.4.1.1 Loop current mode
2.4.1.2 Active operation
2.4.1.3 PV selection
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Select single point or multi-drop
HART communication.
Shows the application possibili‐
ties of your hardware. The kind
of operation depends on the wir‐
ing.
Select process value for current
output.

E.5 Inputs and outputs

Default value Value range
[unit]
Loop current
● Off
mode, 4..20 mA
● Loop current
mode, 4..20
mA
● Multi drop
mode, 4 mA
Active operation
● Active
not possible
operation not
possible
● Active
operation
possible
Mass flow For none function‐
al safety applica‐
tions (SIL):
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Reference
density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
● Control valve
For functional
safety applica‐
tions (SIL):
● Mass flow
● Volume flow
● Density
Default settings
Access
level
User
User
User
345