Connecting The Power Supply - Wall Mount - Siemens SITRANS FC430 Operating Instructions Manual

Connecting
5.2 Connecting FC430
6. Close and latch power supply terminal protection cover.
7. Tighten cable gland.
5.2.2.9

Connecting the power supply - Wall mount

1. Open enclosure lid, unscrew power supply terminal protection cover screw, and remove
protection cover.
2. Remove blind plug and fit cable gland.
3. Push cable through open gland and cable path
4. Restore ferrule and tighten cap to lightly hold cable in place.
84
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA