B.10 Menu Item 3.2: Diagnostic Events - Siemens SITRANS FC430 Operating Instructions Manual

HMI menu structure

B.10 Menu item 3.2: Diagnostic events

B.10 Menu item 3.2: Diagnostic events
Table B-18 Diagnostic events
Level 3
No. Name
3.2.1 Active diagnostic events
3.2.2 Diagnostic log
3.2.3 Clear diagnostic log
3.2.4 Alarm acknowledge mode
3.2.5 Transmitter detailed
events
3.2.6 Suppression time
3.2.7 Enable alarms
3.2.8 Alarm class assignment
Note
Transmitter Detail Alarms
Menu item 3.2.7 (Transmitter Detail Alarms) is only visible in case an alarm with detailed alarm
information is pending.
300
Level 4
No. Name
3.2.7.3 Process alarms (group 1)
3.2.7.4 Process alarms (group 2)
3.2.7.7 Totalizers events
3.2.7.8 Device events
3.2.7.9 Simulation alarms (group
1)
3.2.7.10 Simulation alarms (group
2)
3.2.7.11 Input/output alarms
(group 1)
3.2.7.13 Dosing alarms
148 Transm. temp above
3.2.8.8
alarm limit
149 Transm. temp above
3.2.8.9
alarm limit
Level 5
No. Name
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA