First Resending Time (MGCP)
Specifies the length of time that the PBX waits before starting to resend MGCP (Media Gateway Control
Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
500 ´ n (n=1–8) ms
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
Resending Time Out (MGCP)
Specifies the length of time after which the PBX terminates resending MGCP (Media Gateway Control Protocol)
data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
75–120 s
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
CS Repeater Mode
Specifies the CS Repeater Mode setting. If Normal is selected, DECT communication will not be encrypted.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
Normal, Optional
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
PC Programming Manual
353