Panasonic KX-NS1000 Programming Manual page 983

Fax Properties—Fax Busy Coverage Mode
When the system is busy and cannot receive faxes, the system can transfer incoming faxes to a fax extension,
or not answer the incoming call (the extension will be busy).
Value Range
Transfer to Fax Extension, No Receiving
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.1.3 Fax Server
Disconnect Parameters
Maximum Silence Time (0-60 s)
Specifies the length of silence detected by the system before the system disconnects the call.
Value Range
0–60 s
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Maximum Continuous Tone Time (0-60 s)
Specifies the length of time the system waits when a continuous tone is detected before it disconnects the call.
Value Range
0–60 s
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Maximum Cyclic Tone Time (0-60 s)
Specifies the length of time the system waits when a cyclic tone is detected before it disconnects the call.
Value Range
0–60 s
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual 983