Panasonic KX-NS1000 Programming Manual page 846

19.1 PBX Configuration—[11-1] Maintenance—Main
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
Communication—Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal computer.
Value Range
1 bit, 2 bit
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
External Modem Command—Automatic Initialisation
Specifies the command to automatically initialise an external modem when it is plugged into the Serial Interface
(RS-232C) port of the PBX.
Value Range
Max. 30 characters
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the PBX
detects a PBX error, the System Alarm button on the PT turns on red. When this button is pressed, the display
will show the error number, and the button light will turn off automatically.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
846 PC Programming Manual