10.9 PBX Configuration—[2-9] System—System Options
To enable this setting,
Flash".
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.4.3 Call Pickup
DSS Key—Automatic Transfer for Extension Call
Specifies whether pressing a DSS or SDN button during an extension-to-extension call disconnects the current
call or places the call on consultation hold.
Value Range
Disable: The PBX disconnects the current call, and calls the extension assigned to the DSS or SDN button.
Enable: The PBX places the current call on consultation hold.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.12.1 Call Transfer
DSS Key—Caller Information Display before Call Pick-up
Specifies whether incoming caller information is displayed after pressing the DSS button when a call is ringing
at the designated extension, instead of answering the call.
Value Range
Enable: Pressing the DSS button displays the caller's information.
Disable: Pressing the DSS button answers the call.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.4.3 Call Pickup
556
PC Programming Manual
DSS Key—DSS key mode for Incoming Call on this screen must be set to "ON or