Panasonic KX-NS1000 Programming Manual page 218

9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
T38 FAX UDPTL Redundancy count for data
Specifies the redundancy count for data when using the T.38 protocol.
Value Range
0–3
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
T38 FAX Rate Management Method
Specifies the rate management method when using the T.38 protocol.
Value Range
Transferred TCF, Local TCF
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
DN2IP
Leading Number
Specifies the leading digits in dialled numbers by which to associate calls with the appropriate destination.
Value Range
Max. 30 digits (consisting of 0–9)
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Remaining Number of Digits
Specifies the number of digits to be dialled following the leading number to access the destination.
Value Range
0–29
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
218 PC Programming Manual