Utility—Monitor/Trace—V-Sipgw16 Protocol Trace - Panasonic KX-NS1000 Programming Manual

7.4.3 Utility—Monitor/Trace—V-SIPGW16 Protocol Trace
7.4.3 Utility—Monitor/Trace—V-SIPGW16 Protocol Trace
The trace data of protocol activity can be collected from the V-SIPGW16 card and saved to a PC using the
V-SIPGW16 Protocol Trace.
This option requires that the target V-SIPGW16 card be set to INS status.
This option is only available at Installer level in On-line mode.
Follow the steps below to trace and file V-SIPGW16 card protocol activity:
To save trace data to the Storage Memory Card
1.
From the tree menu, select V-SIPGW16 Protocol Trace.
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the
Storage Memory Card (file name: "PRTSIPC").
To transfer trace data to the PC
1.
Click the File Transfer PBX to PC link to access the file transfer screen.
The list of files will be displayed.
Note
The file transfer screen can also be accessed from the tree menu (see 7.2.2 Utility—File—File
Transfer PBX to PC).
2.
Select the desired trace data file.
3.
Click Transfer.
4.
Navigate to the folder in which you want to save the file.
5.
Enter a file name.
6.
Click Save.
7.
Click OK.
130 PC Programming Manual