User Guide: PTP 800 Licensed Ethernet Microwave
Manual recovery mode
Perform this task to enter recovery mode manually.
To enter recovery mode manually, proceed as follows:
Procedure 7-1 Enter recovery mode manually
Power off the CMU.
1
2
Press the CMU front panel Recovery button
Keep the Recovery button pressed while powering on the CMU. Keep the
3
Recovery button pressed for at least 20 seconds after powering on.
4
When the CMU status indicator
recovery mode.
phn-1478_005v000
Apr 2010
(Figure
(Table
1-3) blinks red, the CMU is in
Recovering the CMU
1-2).
7-13