Table of Contents
Advertisement
Configuring the IP and Ethernet interfaces
Attribute
Management Mode
6-22
'Out-of-Band Local' means that the web interface can be
reached from the management port at the local CMU
only. This mode allows the construction of a management
network that is isolated from the customer network. This
is the default mode. For more information, see
band local management
'Out-of-Band' means that the web interface can be
reached from the management port at both the local and
remote CMUs (assuming that the wireless link is
established). For more information, see
management
on page 1-27.
NOTE
If 'Out-of-Band' is selected, remember to set the
Management Committed Information Rate
6-12).
'In-Band' means that the web interface can be reached
from the data port at both the local and remote CMUs
(assuming that the wireless link is established). In this
mode, the management port is disabled. For more
information, see
In-band management
Chapter 6 Operation
Meaning
on page 1-27.
Out-of-band
on page 1-28.
phn-1478_005v000
Out-of-
(Table
Apr 2010
Advertisement
Table of Contents
