Electrical Accessories; Electrical Control Accessories; Yo-Yc-Yo2: Opening And Closing Coil - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

Electrical accessories

1 - Electrical control accessories

YO-YC-YO2: Opening and
closing coil
D1 C1 C11
C3 C13
D2 C2 C12
YU
YC
YO2
73 | © 2017 ABB | 1SDH000999R0002 - ECN000058721 - Rev. B
The opening coils, YO and YO2, and the closing coil, YC, allow the circuit-breaker to be controlled remotely.
The opening of the circuit-breaker is always possible with the circuit-breaker closed, while closing is possible
with the circuit-breaker open and the closing springs charged.
The opening and closing coils can operate in two different modes:
instantaneous service (the minimum duration of the command impulse must be 100ms).
service with permanent power supply.
IMPORTANT:
• If the closing coil is permanently energized and the opening coil trips, after opening,
the closing coil must be momentarily de-energized so that it can be reused for the next
closing operation.
• If instead the opening coil trips, it is necessary, after having de-energized it, to wait at
least 100 ms before operating the closing coil.
NOTE: the second opening coil YO2 is alternative to the undervoltage coil YU.
Available voltages and characteristics
The tables listing the available voltages and the electrical characteristics are provided below:
Available voltages (Un)
YO
24 V AC/DC
30 V AC/DC
48 V AC/DC
60 V AC/DC
110...120 V AC/DC
220...240 V AC/DC
240...250 V AC/DC
277 V AC/DC
380...400 V AC
415...440 V AC
480...500 V AC
500...550 V AC
General characteristics YO-YO2
Operating limits 70%...110% Un
Inrush power (Ps) AC= 300VA DC= 300W
Power during charge (Pc): AC= 3.5VA DC= 3.5W
Opening time 35ms
Closing time -
ABB | SACE Emax 2
YC
85%...110% Un
-
50ms
Electrical accessories | 1 - Electrical control accessories