Connections - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

Connections The modules must be mounted on the terminal box of the circuit-breaker or of the fixed part of the withdrawable
65 | © 2017 ABB | 1SDH000999R0002 - ECN000058721 - Rev. B
circuit-breaker, in the first free slot after the Ekip Supply module.
Information on the assembly is available on the web site http://www.abb.com/abblibrary/DownloadCenter/,
in particular in the kit sheet 1SDH001000R0514.
An example with an E1.2 circuit-breaker in fixed and withdrawable versions is provided to the side.
The following is a view of the terminal block of the E1.2 circuit-breakers and the wiring diagram:
95 35 R1 V3 Vn
96 36 U1 R2 V2 Rct
U2
98 38 V1 Gzo
S51 S33 M YR Trip Unit I/O
Diagram 58
For the communication bus, a cable of type Cat.6 S/FTP must be used (Cat.6 with S/FTP double shielding).
If the circuit-breaker is the withdrawable type, it is recommended to use cables fitted with a RJ45 socket with
output at 90°.
Further information is available on page 59, or on the site http://www.abb.com/abblibrary/DownloadCenter/,
where the wiring diagram is available 1SDM000091R0001.
Ge Szi
Ge- Szo
Szc Gzi
Module Module EKIP Supply
A4
*O)
S75I/5
XK7 1 XK7
A3
K51
COM
n
A4
LINK BUS
*L)
Ne- 45 D1 C1 C11 11 21 31
W3 K1 Ne 46 C3 C13 12 22 32
Rca 48 D2 C2 C12 14 24 34
W4 K2
YU
TU
RTC YC YO Q1 Q2 Q3
I/O YO2
58
2
W13
*R)
Electronic accessories | 4 - Ekip Link module
ABB | SACE Emax 2
41
42
44
Q4