Structural Specification - Sanyo MCO-5M Service Manual

Structural specification

Name
Model
External dimensions
Internal dimensions
Interior volume
Exterior
Interior
Insulation
Outer door
Inner door
Tray
Access port
Accessories
Weight
Optional accessory
Parts for Antibacterial stainless steel
Inner cabinet
Trays
Tray support (right & left)
Duct
Humidifying pan cover
The humidifying pan is not made of stainless steel containing copper.
Multi gas incubator
MCO-5M
W 480 x D 548 x H 575 (mm)
W 350 x D 378 x H 375 (mm)
49 L
Acrylic finish baked on zinc galvanized steel
Stainless steel containing copper (R corner structure)
Rigid polyurethane foamed-in place (CFC-FREE)
Acrylic finish baked on zinc galvanized steel,
Reversible support (selectable right or left-hand door)
Tempered glass (thickness 5mm)
Stainless steel containing copper
Standard 3 trays (maximum 6 trays) available
W310 x D310 x H12 (mm), Maximum load: 4kg/tray
30mm x 1, on the back side
Power supply cord, 3 trays, 3 gas tube, 1 humidifying pan,
Stacking plate A & B, 4 protective stickers, 6 tube bands,
1 injection nozzle, 1 injection nozzle tube
50 kg
Self-contained CO cylinder changeover system (MCO-5GC)
2
Extra tray (MCO-30ST), UV system kit (MCO-18UVS2),
Roller base (MCO-5RB), CO
2
cylinder regulator (MCO-100L)
2