Sanyo MCO-5M Service Manual page 45

UV lamp kit for replacement
1. UV lamp kit description
Name
Part code
Kit contains
UV lamp
Socket cover
Glow starter
2. Replacement procedure
(1) Turn the main power OFF.
(2) Remove UV lamp cover from UV lamp ass'y
to pull UV lamp ass'y toward you. (See
Fig..2)
(3) Remove UV lamp from sockets. (See Fig. 3)
(4) Remove socket
sockets to replace new covers.
(5) Fit new UV lamp to sockets to complete UV
lamp ass'y.
(6) Ensure to put UV lamp ass'y back to original
position then attach UV lamp cover on UV
lamp ass'y.
(7) Replace glow starter located on left side of
rear panel.
(8) Turn the main power ON.
(9) Initialize UV lamp ON period.
(See next page "3. Initialization of UV lamp
accumulated ON time)
(10) Ensure UV lamp to be lit with pressing door
switch when outer door is open. (At the time
inner door should be shut)
UV lamp kit
624 224 0792
1 pc 624 215 8257
2 pcs 624 223 3466
1 pc 624 006 5281
covers (rubber)
42
Glow starter
from
UV lamp cover
Socket cover
UV lamp
Fig.1 UV lamp kit
UV lamp ass'y
Fig.2
lamp
Socket cover
Socket
Fig.3