Panasonic KX-T336 System Reference Manual page 867

8.00 COPY
Description
This function enables you to copy the desired
system programming data from specified screen
to multiple screens at a time, and is available in
the screens where COPY is displayed in the
function field.
Operation
<Example>
Copying the data in System "Class of Service"
No.01 to COS No.30 through No.32
System-Class of Service
Class of Service (COS) No. = 01 (1/2)
1 COMMON 2 INDEX 3 COPY 4 READ
1. Press the F3 key.
COPY>COS No. (01-32)=
1 2 3 4
2. Enter the original COS number, 01.
COPY>COS No. (01-32)=01
1 2 3 4
3. Move the Cursor to the first COS No. position
to be copied by using
COS number, 30.
COPY>COS No. (01-32)=01
1 2 3 4
4. Move the cursor to the last COS No. position
to be copied by using
COS number, 32
COPY>COS No. (01-32)=01
1 2 3 4
5 6 HRDCPY 7 8
F3
COS= –
5 6 7 EXIT 8
0
COS No.= –
5 6 7 EXIT 8
. Then enter the
0
3
COS No.=30 –
5 6 7 EXIT 8
. Then enter the
2
3
COS No.=30-32
5 6 7 EXIT 8
5. Press the RETURN key.
System-Class of Service
Class of Service (COS) No. = 01 (1/2)
COPY>COS No. (01-32)= 01
***** OK
1 2 3
• The message below appears when the
original data of COS No.=01 is properly
copied to COS No.=30 through 32
*****OK
• Press the EXIT (F7) key to finish this mode.
Conditions
To copy the original to only one destination, enter
the same destination number in the first and last
positions. In this case, READ function is useful.
<Example>
Copying COS No.=01 into COS No. 02
COPY>COS No. (01-32)=01
1 COMMON 2 INDEX 3 COPY
1
Enter the destination numbers in ascending order.
To repeat the "COPY" operation, repeat from step
2. Then press the RETURN key.
If the COPY operation is unsuccessful, one of the
error messages below appears.
Error message types depend on the situation.
*****Error : Illegal parameter
*****Error : Not installed
For details about the Error messages, refer to
Section 9-M "Error Message Tables."
7-J-13
RETURN
COS No.= 30-32
4 5 6 7 EXIT
COS No.= 02-02
4 READ 5 6 HRD CPY 7
8
8