Panasonic KX-T336 System Reference Manual page 380

14.01 Calling from TIE to TIE
Description
(1) By dialing Extension Number only
Description
Programming example: To make up the TIE Line Network above, the following system programming is
PBX-1
PBX-2
TIE calls among several different company locations can be done by dialing a 3
or 4-digit extension number only, or by dialing a location number (PBX Code)
and an extension number.
Extension users can make a call via TIE line to other extension users in other
PBXs within a private network by simply dialing a 3 or 4-digit extension number.
A Network of TIE Lines
Call Flow
1. Ext.100 dials 200.
2. Ext.100 is connected to Ext.200 of PBX-2.
required at PBX-1 and -2 respectively.
• System - Operation (1/3)-PBX Code: (Blank)
• System - Numbering Plan (9-D-6.00, 10-C-10.00)
1st Hundred Extension
Other PBX Extension 01
• Special Attended - TIE Line Routing Table (9-K-4.00,10-C-65.01)
No. Code Delete
Digit
01 2XX 0
• System - Operation (1/3)-PBX Code: (Blank)
• System - Numbering Plan
1st Hundred Extension
Other PBX Extension 01
• Special Attended - TIE Line Routing Table
No. Code Delete
Digit
01 1XX 0
3-F-72
(70695)
1
2
Insert Trunk Group Hunt Sequence
Dial
01 02
10
2
1
Insert Trunk Group Hunt Sequence
Dial
01 02
10