Panasonic KX-T336 System Reference Manual page 528

5.02 Conference-Two Appearances
Description
During a conversation with an extension or an
outside party on the DN or the CO button,
employing another DN or CO button instead of
currently using button allows another party (an
extension or an outside party) to join the
conversation and offers Conference-Two
Appearances.
On the TSW card, there are eight standard
conference trunks provided for this purpose.
By equipping the optional conference expansion
card (KX-T336104), the number of conference
trunks increases to 64.
To utilize optional conference expansion card,
assign "Configuration-System Assignment", TSW
Additional CONF to "Yes."
If two members of the conference are outside
parties, two conference trunks are necessary.
In other cases, one conference trunk is enough.
If a member of the conference is using the PITS
provided with a display, the following message
appears on the display, showing the other two
members:
• When both of the other members are
extensions:
E1234 & E5678
• When one is an extension and the other is an
outside party:
E1234 & Panas
• When both of the other members are outside
parties:
Matsu & Panas
Directory numbers of the
extensions
Leading five digits of the
CO line's name
Programming
System Programming
"Configuration-System Assignment",
TSW Additional CONF
Conditions
Pressing the CONF button after calling the
second party establishes conference. If no
conference trunks are available, pressing the
CONF button is ignored and conference is not
established.
Pressing the TRANSFER button by the
conference originator during a conference
restores conversation with the previous party,
placing the latter party on Consultation Hold.
Pressing the TRANSFER button again offers
conversation with the latter party, placing the
previous party on Consultation Hold. Pressing
the CONF button in this status restores the
conference.
Pressing the TRANSFER buttons by a conference
member other than the conference originator
during the conference is ignored.
4-G-7
Reference
VT Dumb
9-C-1.01 10-C-1.00