Panasonic KX-T336 System Reference Manual page 894

3) Batch Type-BT
Enables you to edit the data in batch processing.
Entry of data by batch type
• Enter comma (,) between items.
• Enter slash (/) between indexes.
• Enter only comma (,) or slash (/) when not
entering the parameter.
The date of the parameter is not changed.
• To conclude BT mode in the middle of entry, enter
$EOD after the entry of comma (,) or slash (/).
<Example 1>
Entering External Pager (PAG) in Batch type mode
Enter:
; PRG>PAG BT ( )
Displays:
PAG BT
Enter the appropriate numbers and letters:
1, Y,1, Y, Y ( )
Concludes Batch type mode
; PRG
<Example 2>
Concluding entry in the middle of the entry of
operation (OPR) in the Batch type mode
Enter:
; PRG>OPR BT 1 (
Displays:
OPR BT 1
Enter the appropriate data and conclude in the
middle:
Y, Y, 2, 2, $EOD (
Concludes Batch type mode
; PRG
)
)
3. Index Number
Enter the index number if required. For the
commands without indexes and the commands
which can omit the index numbers, entry of index
number is not necessary. Refer to the list below.
When the index number is omitted, Item number
should be also omitted.
(Commands without indexes)
SYA, TIM, LAG, NBP, ABS, ATT, TR3, INF,
WS1, WS2, WS3
(Commands possible to omit the Index number)
SLA, COM, CPG, PAG, MUS, DPH, DIC, DIP,
DID, UC1, UC2, PFT
4. Item Number
Enter when you want to specify an item number.
Possible to be omitted in all commands.
8-D-3
(70695)