Panasonic KX-T336 System Reference Manual page 433

4
The MESSAGE button is not provided on the PITS's listed below, but can be assigned to the
assignable buttons respectively, as follows:
PITS not provided with MESSAGE
KX-T30830
KX-T30820, KX-T30850
KX-T61620, KX-T61630, KX-T61650
For the assignment of the FWD/DND, SAVE and MESSAGE buttons, refer to the
following.
FWD/DND button
SAVE button
MESSAGE button
Usage
SP-PHONE (MONITOR) Button and Indicator
This key allows the set user to receive or originate calls without using the handset.
Each time the SP-PHONE button is pressed, the speaker and microphone are
alternately switched on and off.
AUTO/MEMORY, AUTO DIAL/STORE Button and Indicator
This button is used for dialing system speed dial numbers and for storing the
results of a local programming operation.
PAUSE Button
This button is used to insert a pause in a speed dial number.
REDIAL (LNR) Button
This button is causes the last number dialed to be redialed when the key is
pressed.
SAVE (SNR) Button
This button allows the set user to store the telephone number to make the same
call again by pressing the key.
ICM, INTERCOM Button and Indicator
This button is used to make or receive an intercom call.
AUTO ANS/MUTE, AUTO ANSWER/MUTE Button and Indicator
This dual function button is used to automatically answer an intercom call or
disable the microphone during handsfree operation.
HOLD Button and Indicator
This button allows the set user to place any call at the set on hold.
TRANSFER Button
This is used to transfer an outside or an intercom call to another extension.
Assignable Buttons
Section 9-G-1.03 "Station (3/3)"
Section 12-C-2.00 "PF (Programmable Feature)
Button Assignment"
Section 9-G-1.02 "Station (2/3)"
Section 9-G-1.03 "Station (3/3)"
4-B-2
DSS 8
DN 3
DN 6