Fault Reports - GE L90 Instruction Manual
Line current differential system
Hide thumbs
Also See for L90:
- Instruction manual (832 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (752 pages)
Table of Contents
Advertisement
CHAPTER 5: SETTINGS
local time these provide. When the RTC is synchronized with a communications protocol providing only UTC (such as PTP or
SNTP), the time offset setting is used to determine local time from the UTC provided. PTP
ALTERNATE_TIME_OFFSET_INDICATOR TLVs are not used to calculate local time.
and
DAYLIGHT SAVINGS TIME
DST
when IRIG-B time synchronization is active, the local time in the IRIG-B signal contains any daylight savings time offset and
so the DST settings are ignored.
5.3.8 Fault reports
SETTINGS PRODUCT SETUP FAULT REPORTS FAULT REPORT 1(4)
FAULT REPORT 1
L90 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
— Can be used to allow the relay to follow the DST rules of the local time zone. Note that
FAULT REPORT 1
SOURCE: SRC 1
FAULT REPORT 1 TRIG:
Off
FAULT REPORT 1 Z1
MAG: 3.00 Ω
FAULT REPORT 1 Z1
ANGLE: 75°
FAULT REPORT 1 Z0
MAG: 9.00 Ω
FAULT REPORT 1 Z0
ANGLE: 75°
FAULT REPORT 1 Z0M
MAG: 0.00 Ω
FAULT REPORT 1 Z0M
ANGLE: 0°
FAULT REPORT 1 LINE
LENGTH UNITS: km
FAULT REP 1 LENGTH
(km ): 100.0
FAULT REP 1 REM1-TAP
Z1 MAG: 3.00 Ω
FAULT REP 1 REM1-TAP
Z1 ANG: 75°
FAULT REP 1 REM1-TAP
LENGTH (km ): 100.0
FAULT REP 1 REM2-TAP
Z1 MAG: 3.00 Ω
FAULT REP 1 REM2-TAP
Z1 ANG: 75°
FAULT REP 1 REM2-TAP
LENGTH (km ): 100.0
FAULT REPORT 1 VT
SUBSTITUTION: None
FAULT REP 1 SYSTEM
Z0 MAG: 2.00 Ω
FAULT REP 1 SYSTEM
Z0 ANGLE: 75°
Range:
SRC 1, SRC 2, SRC 3, SRC 4
Range:
FlexLogic operand
Range:
0.01 to 250.00 ohms in steps of 0.01
Range:
25 to 90° in steps of 1
Range:
0.01 to 650.00 ohms in steps of 0.01
Range:
25 to 90° in steps of 1
Range:
0.00 to 650.00 ohms in steps of 0.01
Range:
25 to 90° in steps of 1
Range:
km, miles
Range:
0.0 to 2000.0 in steps of 0.1
Range: 0.01 to 250.00 ohms in steps of 0.01
Range: 25 to 90° in steps of 1
Range: 0.0 to 2000.0 in steps of 0.1
Range: 0.01 to 250.00 ohms in steps of 0.01
Range: 25 to 90° in steps of 1
Range: 0.0 to 2000.0 in steps of 0.1
Range:
None, I0, V0
Range:
0.01 to 650.00 ohms in steps of 0.01
Range:
25 to 90° in steps of 1
PRODUCT SETUP
5
5-113
Advertisement
Table of Contents
