Motorola AT Commands G24-L Developer's Manual page 46

AT Commands Summary
AT Command
DL
H
A
+CRC
RING
+CRING
+CLIP
+CCWA
+CHLD
+CCFC
+CLIR
+CBST
O
&Q
+CHUP
+CSNS
+MDC
+CTFR1
+MVC
+MTTY
Call Status Messages
+CPAS
1-16
Table 1-1: AT Commands (Cont.)
Description
This command places a voice call to the last number dialed.
This command hangs up, or terminates a particular call.
This command answers an incoming call, placing the G24-L into the
appropriate mode, as indicated by the RING message.
This command controls whether to present the extended format of
the incoming call indication.
This unsolicited event is received when an incoming call (voice,
data or fax) is indicated by the cellular network.
This unsolicited event indicates the type of incoming call.
This command controls the Calling Line Identity (CLI) presentation
to the terminal when there is an incoming call.
This command controls the Call Waiting supplementary service,
including settings and querying of the network by the G24-L.
This command controls the Call Hold and Multiparty Conversation
supplementary services.
This command controls the call-forwarding supplementary service.
This command enables/disables the sending of caller ID information
to the called party, for an outgoing call.
This command handles the selection of the bearer service and the
connection element to be used when data calls are originated.
This command returns a phone to the Online Data mode and issues a
CONNECT or CONNECT <text> result code.
This command selects the asynchronous mode, and has no effect.
This command causes the G24-L to hang up the current GSM call.
This command handles the selection of the bearer or teleservice to
be used when a mobile terminated single numbering scheme call is
established.
This command enables you to select the desired messages to be
displayed upon connection of a voice call with a remote party.
This command terminates an incoming call and diverts the caller to
the number previously defined in CCFC, or to a voice mail if one
exists for the subscriber.
This AT command is used to choose and configure the
priority order of the supported voice codecs (vocoders).
This command is used to enable/disable the TTY (Tele Typewriter)
support in the G24-L.
This command displays the current activity status of the G24-L, for
example, call in progress, or ringing.
G24-L AT Commands Reference Manual
Page
Page 3-14
Page 3-15
Page 3-17
Page 3-17
Page 3-17
Page 3-17
Page 3-19
Page 3-21
Page 3-23
Page 3-27
Page 3-29
Page 3-31
Page 3-33
Page 3-33
Page 3-34
Page 3-34
Page 3-36
Page 3-37
Page 3-38
Page 3-57
Page 3-39
April 15, 2008