Motorola AT Commands G24-L Developer's Manual page 413

+MAVOL
+MBC
+MCSAT
+MCSN
+MCST
+MCWAKE
+MDC
+MDSI
+MFS
+MGEER
+MGGIND
+MIOC
+MIOD
April 15, 2008
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command enables you to
determine a volume setting for a
particular feature in a particular
accessory.
This command controls the
battery charger process.
This command
enables/disables/exercises SMS
alert tone for an arriving SMS.
This command sets EFmsisdn in
the SIM.
This command displays the
current state of the call
processing, and also
enables/disables the unsolicited
indication of any change in the
call processing state.
This command requests reports
on the status of the GPRS/GSM
coverage.
This command enables you to
select the desired messages to be
displayed upon connection of a
voice call with a remote party.
This command enables
unsolicited reporting of
indications of SIM deactivation
and invalidation.
This command is used to
determine how long the G24-L
waits before attempting to
re-register after a registration
attempt has failed and the G24-L
is not registered.
This command returns the PDP
context activation reject cause.
This command configures the
service indicator on pin 49 of the
70 pin connector to be GPRS or
GSM.
This command defines the
G24-L 8 GPIO pins data
value.
This command defines the
G24-L 8 GPIO pins
configuration.
G24-L AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-166
Page 3-130
Page 3-111
Page 3-69
Page 3-42
Page 3-139
Page 3-36
Page 3-67
Page 3-126
Page 3-240
Page 3-140
Page 3-144
Page 3-147
Page
A-11