Motorola AT Commands G24-L Developer's Manual page 416

AT Commands Alphabetical Summary
+MSCTS
+MSDNS
+MTCTS
+MTDTR
+MTKA
+MTKC
+MTKE
+MTKM
+MTKP
+MTKR
+MTTY
+MVC
+TPIN
+VTD
A-14
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command defines the
behavior of the CTS line when
the G24-L is in Sleep mode.
This command sets/reads DNS IP
address for each socket.
This command sets the CTS pin
of the RS232 to not active (high),
waits one second and then returns
the CTS to active (low).
This command checks and
outputs the physical current
status of the DTR pin of the
RS232.
This command sends
acknowledge response from the
user (TE) to the STK.
This unsolicited event notifies the
terminal when supplementary
services, SMS Control or Call
Control are modified.
This command enables/disables
the SIM ToolKit functionalities.
This is both a command and an
unsolicited event. The command
selects items from the menu.
This is both a command and an
unsolicited event. The command
responds to an unsolicited event.
This command displays the
profile that is downloaded from
the G24-L to the SIM during the
SIM initialization process.
This command is used to
enable/disable the TTY (Tele
Typewriter) support in the G24.
This AT command is used to
choose and configure the
priority order of the supported
voice codecs (vocoders).
This command queries the
number of remaining SIM
PIN/PUK entering attempts.
This command handles the
selection of tone duration.
G24-L AT Commands Reference Manual
Description
Page 3-205
Page 3-299
Page 3-135
Page 3-134
Page 3-274
Page 3-274
Page 3-257
Page 3-272
Page 3-258
Page 3-247
Page 3-57
Page 3-38
Page 3-182
Page 3-175
Page
April 15, 2008