ABB COM600 Series User Manual page 23

1MRS755495 COM600 series, Version 5.0
DNP 3.0 Serial Slave (OPC) User's Manual
Property / Para- Value or Value range/ Default
meter
Bit Rate 300 bits/s
600 bits/s
1200 bits/s
2400 bits/s
4800 bits/s
9600 bits/s
19200 bits/s
38400 bits/s
56000 bits/s
57600 bits/s
115200 bits/s
128000 bits/s
256000 bits/s
Default: 19200 bits/s
Communication Port COM1...COM8
Default: COM1
Parity No parity check
Even parity
Odd parity
Default: Even parity
Receiver Data Bit 5...8
Count
Default: 8
Stop Bits 1 stop bit
2 stop bits
Default: 1 stop bit
Transmitter Data Bit 5...8
Count
Default: 8
Communication
Control
Description
Transmission rate used on the channel.
Serial port used by the DNP 3.0 serial
protocol.
Number of ports depends on the used
hardware.
Defines the parity check used for the
characters transferred on the channel.
Specifies the number of data bits in each
received character.
Specifies the number of stop bits attached
to each transmitted character.
Specifies the number of data bits in each
transmitted character.
23