Lldp Compliance Admin-Status Cdp; Lldp Compliance Cdp - HP 3600 v2 Series Command Reference Manual

lldp compliance admin-status cdp

Syntax
lldp compliance admin-status cdp { disable | txrx }
undo lldp compliance admin-status cdp
View
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default level
2: System level
Parameters
disable: Specifies the disable mode, where CDP-compatible LLDP cannot receive or transmit CDP
packets.
txrx: Specifies the TxRx mode, where CDP-compatible LLDP can send and receive CDP packets.
Description
Use lldp compliance admin-status cdp to configure the operating mode of CDP-compatible LLDP on a
port or port group.
Use undo lldp compliance admin-status cdp to restore the default.
By default, CDP-compatible LLDP operates in disable mode.
For your device to work with Cisco IP phones, you must enable CDP-compatible LLDP globally and then
configure CDP-compatible LLDP to operate in TxRx mode on the specified ports.
Related commands: lldp compliance cdp.
Examples
# Configure CDP-compatible LLDP to operate in TxRx mode on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] lldp compliance admin-status cdp txrx

lldp compliance cdp

Syntax
lldp compliance cdp
undo lldp compliance cdp
View
System view
Default level
2: System level
Parameters
None
251