Gvrp Registration; Reset Garp Statistics - HP 3600 v2 Series Command Reference Manual

gvrp registration

Syntax
gvrp registration { fixed | forbidden | normal }
undo gvrp registration
View
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default level
2: System level
Parameters
fixed: Sets the GVRP registration mode to fixed.
forbidden: Sets the GVRP registration mode to forbidden.
normal: Sets the GVRP registration mode to normal.
Description
Use gvrp registration to configure the GVRP registration mode.
Use undo gvrp registration to restore the default.
The default GVRP registration mode is normal.
Settings in system view take effect globally; settings in Ethernet view or Layer 2 aggregate interface take
effect on the current interface; settings in port group view take effect on all ports in the port group.
This command is only available on trunk ports.
Related commands: display garp statistics.
Examples
# Set the GVRP registration mode to fixed on port Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port link-type trunk
[Sysname-Ethernet1/0/1] gvrp registration fixed

reset garp statistics

Syntax
reset garp statistics [ interface interface-list ]
View
User view
Default level
2: System level
Parameters
interface interface-list: Clears the GARP statistics of one or multiple ports.
You can provide up to 10 port lists, specified in the following ways:
223