display gvrp vlan-operation
Syntax
display gvrp vlan-operation interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display gvrp vlan-operation to display information about dynamic VLAN operations on a port.
Examples
# Display information about dynamic VLAN operations on Ethernet 1/0/1.
<Sysname> display gvrp vlan-operation interface ethernet 1/0/1
Dynamic VLAN operations on port Ethernet1/0/1
garp timer hold
Syntax
garp timer hold timer-value
undo garp timer hold
View
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Hold timer (in centiseconds), which must be a multiple of 5 and range from 10 (inclusive) to
half the Join timer (inclusive).
Operations of creating VLAN
Operations of deleting VLAN
Operations of adding VLAN to TRUNK
Operations of deleting VLAN from TRUNK
219
:
2-100
:
none
:
2-100
:
none