Interface Vlan-Interface - HP 3600 v2 Series Command Reference Manual

2001::1, subnet is 2001::/64 [TENTATIVE]
Description: VLAN 0003
Name: VLAN 0003
Tagged
Untagged Ports: none
Table 34 Command output
Field
VLAN Type
Route interface
Description
Name
IPv4 address
IPv4 subnet mask
IPv6 global unicast
address(es)
Tagged Ports
Untagged Ports

interface vlan-interface

Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
View
System view
Default level
2: System level
Parameters
vlan-interface-id: Specifies a VLAN interface number, in the range of 1 to 4094.
Description
Use interface vlan-interface to create a VLAN interface and enter its view or enter the view of an existing
VLAN interface.
Use undo interface vlan-interface to remove the specified VLAN interface.
By default, no VLAN interface is created.
Create the VLAN before you create the VLAN interface.
Ports: none
Description
VLAN type, static or dynamic.
Indicates whether the VLAN interface is configured or not.
Description of the VLAN.
Name configured for the VLAN.
Primary IPv4 address of the VLAN interface (available only when an IPv4
address is configured for the VLAN interface). To display secondary IP
addresses, use the display interface vlan-interface command in any view or the
display this command in VLAN interface view.
Subnet mask of the primary IPv4 address (available only when an IPv4 address
is configured for the VLAN interface).
Global unicast IPv6 address of the VLAN interface (available only when an
IPv6 address is configured for the VLAN interface).
Ports through which VLAN packets are sent tagged.
Ports through which VLAN packets are sent untagged.
161