Using Gvrp; Gvrp Registration Modes; Protocols And Standards; Configuration Task List - HP A5830 Configuration Manual

Field
Attribute event
Attribute value

Using GVRP

As a GARP application, GVRP uses the operating mechanism of GARP to maintain and propagate
dynamic VLAN registrations throughout a switched LAN.
In a switched LAN, each GVRP-enabled switch sends and receives VLAN declarations and withdrawals
from other GVRP-enabled switches, and dynamically updates its local database, including active VLAN
members and through which port each VLAN member can be reached. This ensures that all GVRP-
enabled switches in a LAN maintain the same VLAN information.
The VLAN information propagated by GVRP includes not only manually configured static VLAN
information but also dynamic VLAN information from other switches.

GVRP registration modes

GVRP is available on trunk ports. It provides the following registration modes:
Normal mode—Performs dynamic VLAN registrations and deregistrations on the trunk port, and

sends declarations and withdrawals for dynamic and static VLANs. VLANs manually configured are
called static VLANs, and VLANs created by GVRP are called dynamic VLANs.
 Fixed mode—Disables the trunk port to register or withdraw dynamic VLAN information, but allows
the port to send declarations for static VLANs. A trunk port in this mode carries only static VLANs,
even if it has been assigned to all VLANs.
Forbidden mode—Disables the trunk port to register or withdraw dynamic VLAN information, and

allows the port to send declarations only for VLAN 1. A trunk port in this mode carries only VLAN 1
even if it has been assigned to any other VLANs.

Protocols and standards

 IEEE 802.1Q, Virtual Bridged Local Area Networks

Configuration task list

Complete these tasks to configure GVRP:
Task
Configuring GVRP functions
Description
Event that the attribute describes
Attribute value
Value

0x00: LeaveAll event

0x01: JoinEmpty event

0x02: JoinIn event

0x03: LeaveEmpty event

0x04: LeaveIn event

0x05: Empty event
VLAN ID for GVRP
If the value of the attribute event field is
0x00 (LeaveAll event), the attribute value
field is invalid
Remarks
Required
137