HP 12500 Series Configuration Manual page 74

# Configure the password for local privilege level switching authentication to 654321.
[Switch] super password simple 654321
[Switch] quit
Configuring the HWTACACS server
NOTE:
The HWTACACS server in this example runs ACSv4.0.
Add a user named test on the HWTACACS server and configure advanced attributes for the user as
follows, as shown in
Select Max Privilege for any AAA Client and set the privilege level to level 3. After these
•
configurations, the user needs to use the password enabpass when switching to level 1, level 2, or
level 3.
• Select Use separate password and specify the password as enabpass.
Figure 20 Configuring advanced attributes for the Telnet user
Verifying the configuration
After you complete the configuration, the Telnet user should be able to telnet to the switch and use
username test@bbb and password aabbcc to enter the user interface of the switch, and access all level
0 commands.
<Switch> telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.70 ...
Figure 20:
64