HP 12500 Series Configuration Manual page 133

Figure 41 Adding an IP address group
Add a portal device:
3.
Select User Access Manager > Portal Service Management > Device from the navigation tree to
a.
enter the portal device configuration page.
Click Add to enter the page shown in
b.
Enter the device name NAS.
c.
Enter the IP address of the switch's interface connected to the user.
d.
Enter the key, which must be the same as that configured on the switch.
e.
Set whether to enable IP address reallocation.
f.
This example uses direct portal authentication, and therefore select No from the Reallocate IP
list.
Select whether to support sever heartbeat and user heartbeat functions.
g.
In this example, select No for both Support Server Heartbeat and Support User Heartbeat.
Click OK.
h.
Figure 42 Adding a portal device
Associate the portal device with the IP address group:
4.
Figure 42.
123