HP 12500 Series Configuration Manual page 297

Routing
Table of Contents

Advertisement

[SwitchB-vlan 10] ipv6 nd detection enable
[SwitchB-vlan 10] quit
# Configure the uplink port GigabitEthernet 3/0/3 as an ND-trusted port, while the downlink ports
GigabitEthernet 3/0/1 and GigabitEthernet 3/0/2 as ND-untrusted ports (the default).
[SwitchB] interface GigabitEthernet 3/0/3
[SwitchB-GigabitEthernet3/0/3] ipv6 nd detection trust
After the configuration is complete, incoming ND packets on ports GigabitEthernet 3/0/1 and
GigabitEthernet 3/0/2 will be checked based on the address entries in the ND snooping table.
287

Advertisement

Table of Contents
loading

Table of Contents