HP 12500 Series Configuration Manual page 239

# Specify the authentication method for user client002 as publickey, and assign the public key
SwitchKey to the user.
[Switch] ssh user client002 service-type stelnet authentication-type publickey assign
publickey SwitchKey
Specify the private key file and establish a connection to the Stelnet server:
3.
Launch PuTTY.exe on the Stelnet client to enter the interface as shown in
a.
In the Host Name (or IP address) field, enter the IP address of the Stelnet server
b.
(192.168.1.40).
Figure 77 Specifying the host name (or IP address)
Select Connection > SSH > Auth from the navigation tree.
c.
Click Browse... to bring up the file selection window, navigate to the private key file
d.
(private.ppk) and click OK.
229
Figure 77.