Details Of Ftp Commands - Mitsubishi Electric Q03UDVCPU User Manual

9.4.3

Details of FTP commands

Details of the FTP commands on the FTP client side, which are supported by the CPU module, and how to use each of
them are described below.
Note that some FTP commands may not function as described in this manual, depending on the FTP application used on the
FTP client side.
Check the functions and operation methods, referring to the manual(s) for the FTP client.
(1) FTP server support commands
binary
●
[Function]
[Specification format]
bye
●
[Function]
[Specification format]
[Identical command]
close
●
[Function]
[Specification format]
delete
●
[Function]
[Specification format]
[Example]
[Similar command]
dir
●
[Function]
[Specification format]
[Example]
[Similar command]
152
Notifies the FTP server of file transfer without conversion.
Neither return codes nor kanji codes are converted.
This command is set automatically in the CPU module.
binary (abbreviated to "bin")
Disconnects the line to the FTP server, and terminates the FTP session.
bye
quit
Disconnects the line to the FTP server.
close
Deletes a file stored in the CPU module.
delete "file path name"
When deleting a file stored in an SD memory card:
delete 2:\MAINSEQ1.USR
mdelete
Displays the names, creation dates, and sizes of the files stored in the CPU module.
dir [drive name:\]
When displaying the detailed information of the files stored in an SD memory card:
dir 2:\
ls