Mitsubishi Electric Q03UDVCPU User Manual page 28

2.
Set MELSOFT connection.
Project window
*1
• For "Ethernet Conf.", drag and drop the "MELSOT Connection Module" from "Module List" to the left side on
the window. Select a protocol from "Protocol" depending on the target device.
• For "Open Setting"
Item
Protocol
Open System
(2) Writing to the CPU module
From the "Write to PLC" window, write the parameter settings to the CPU module.
[Online]
After writing the parameters to the CPU module, power off and on or reset the CPU module to enable the
parameters.
26
[Parameter]
/ button
button can be used with the QnUDVCPU.
Select "TCP" or "UDP" depending on the connected device.
Select "MELSOFT Connection".
[Write to PLC]
[PLC Parameter] [Built-in Ethernet Port Setting]
*1
Setting