Establishing A Connection (Sp.socopen) - Mitsubishi Electric Q03UDVCPU User Manual

7.4.1

Establishing a connection (SP.SOCOPEN)

SP.SOCOPEN
Setting
data
S1
S2
D
*1 File registers set for each local device or program cannot be used.
(1) Setting data
Setting data
U0
S1
S2
D
*2 The "Set by" column indicates the following.
User: The data must be set before executing the SP.SOCOPEN instruction.
System: The CPU module stores the execution result of the SP.SOCOPEN instruction.
When replacing the ZP.OPEN instruction (Ethernet module dedicated instruction), dummy argument can be used in a Built-
in Ethernet port QCPU instruction without rewriting.
106
Command
Internal device
R, ZR
Bit Word
-
*1 *1
-
(except for
*1 *1
T, ST, and
C)
Description
Dummy
Connection number (Setting range: 1 to 16)
Start number of the device from which control data are stored
Start number of the device which turns on for one scan upon
completion of the instruction
+1 also turns on when failed.
D
SP.SOCOPEN U0 S1
J\
U\G
Bit Word
-
-
-
S2 D
Constant
Zn Others
K, H
-
-
*2
Data type
Set by
- Character string
User BIN 16-bit
User, system Device name
System Bit
-
-
-