Appendix 3 Added And Changed Functions - Mitsubishi Electric Q03UDVCPU User Manual

Appendix 3
The following table lists added or modified functions in the CPU module and programming tool for built-in Ethernet port
communications and the corresponding serial numbers of CPU modules and software versions of GX Works2
software.
Added function
Socket communication function (
IP address change function (
Data up to 10238 bytes can be exchanged with the
SP.SOCSND/S(P).SOCRCV(S)/S(P).SOCRDATA instructions
( Page 86, CHAPTER 7)
A-compatible IE frame for communication using the MC protocol
( Page 59, Section 5.1.3)
IP packet transfer function (Available for CC-Link IE Field
Network) ( Page 180, CHAPTER 12)
IP packet transfer function (Available for CC-Link IE Controller
Network) ( Page 180, CHAPTER 12)
File registers available for the A-compatible 1E frame in the MC
protocol ( Page 57, Section 5.1.2 (2))
Predefined protocol function (
Reading/writing device data from/to the CPU module on another
station by specifying an IP address (
*1
13)
MELSOFT connection extended setting (
*1
3.5)
MC protocol communication using the 4E frame (
Section 5.1.3)
SLMP frame send instruction (
*1 This function cannot be used for some models. For the availability of the function, refer to each reference.
*2 For the versions of the intelligent function modules that support the function, refer to the manual for the intelligent
function module used.
*3 Available for the CPU modules with the following serial number (first five digits).
• QnUDE(H)CPU: "14112" or later
• QnUDVCPU: "15043" or later
Added and Changed Functions
Corresponding
Page 86, CHAPTER 7)
Page 170, CHAPTER 11)
*2
*2
*1
Page 75, CHAPTER 6)
Page 182, CHAPTER
Page 31, Section
Page 59,
Page 65, Section 5.2)
×: Not available, -: A function not related to the programming tool
The first five
digits of the
function
corresponding
version
serial number
"11012" or later
"11082" or later
"12052" or later
"13102" or later
"14022" or later
B
*3
"15103" or later
"16043" or later
"17052" or later
"18052" or later
"18112" or later
APPENDICES
The corresponding version of the
programming tool
GX Works2 GX Developer
1.11M or later 8.78G or later
- -
1.77F or later
×
1.98C or later
- -
1.501X or later ×
1.513K or later ×
1.535H or later ×
- -
- ×
201
A