ABB AC500 Introduction Manual page 126

Variant A: Configuration using the fieldbus configurator included in the
programming software
First, we have to specify the hardware. Click on
Configuration". Click on "Hardware Configuration". Press the right mouse button. Select "Append
Subelement/DP Master...".
Set the "Card number" in the appearing window. The following rule applies: The slot number (= card
number) can be gathered from the identification number of the CPU. Furthermore, we can also
determine the coupler form the identification number. The following applies:
•
GJR5 253x 00 Rxxyz with
y = slot number = card number = 1
z = slot number = card number = 2
•
Furthermore, the following code applies to y and z: 2=PROFIBUS DP / 5=DeviceNet / 6=ARCNET /
7=Ethernet / 8=CANopen / 9=Interbus
•
For our example: CPU with identification number R0272 -> slot number 1 -> Ethernet; slot number 2
-> PROFIBUS DP
•
Since we are using the PROFIBUS coupler in our example, the resulting card number is 2.
Confirm with "OK".
____________________________________________________________________________________________________________
G1
Introduction to AC500
. Double click the object "PLC
1-124
AC500 / Issued: 07.2006