Table of Contents
Advertisement
C o n f i g u r a t i o n a n d s o f t w a r e u t i l i t i e s
Options available in the dialog are:
Power ON: Powers on the server.
Power OFF: Powers off the server. This option is not allowed if the server is configured in
restricted mode for EMP operations.
Post-power-up option: Sets the server mode EMP active or BIOS redirection. The setting is
effective at the next power-up. The default selection is EMP active.
Cancel: Exits the dialog with no action taken.
Help: Displays dialog-level help information.
Reset the Server Remotely
Selecting Reset from the Action Menu generates the Reset dialog so that you can remotely reset the
server with POST reset options.
Options available in the dialog are:
System Reset: Resets the server with the selected POST reset options. This operation is not
allowed if the server is configured in restricted mode for EMP operations.
Option Group: Sets the POST reset option that will be effective after reset. The options are
EMP active or BIOS redirection. The default selection is EMP active.
Cancel: Exits the dialog with no action taken.
Help: Displays dialog-level help information.
Phonebook
The EMP console provides a phonebook, a support plug-in that stores names and numbers of
servers in a list that can be updated by adding, modifying, or deleting entries. You can open the
phonebook from the Main Menu and tool bars, or launch it by clicking the Config button.
7/28
FT5000 HANDBOOK
Reset dialog
Phonebook dialog
Advertisement
Table of Contents
