Table of Contents
Advertisement
P o w e r s u p p l i e s
Installing a power supply
1.
Slide the power supply into its bay.
2.
With even force on the flared, vertical edges, push toward the front of the system until the
edges rest against the rear of the chassis and the supply engages its connector.
3.
Install and tighten the four screws holding the supply to the back of the chassis.
4.
Connect the AC power cable. You must slide the cover on the AC connector to access the
connector itself, as shown in the illustration above (A).
4/4
FT5000 HANDBOOK
Advertisement
Table of Contents
