Mitsubishi Electric FT5000 Handbook page 63

Advanced menu
You can make the following selections on the Advanced Menu itself. Use the submenus for the
three other selections that appear on the Advanced Menu.
Feature
Plug and Play OS
Reset Configuration Data
PCI Configuration
I/O Device Configuration
Use Multiprocessor Specification
Large Disk Access Mode
Pause Before Boot
Advanced Chipset Control
PCI configuration submenu
The PCI Configuration Menu contains selections that access other submenus.
PCI device, embedded SCSI submenu
Feature
Option ROM Scan
Enable Master
Latency Timer
PCI devices submenu
Feature
Option ROM Scan
Enable Master
Latency Timer
C o n f i g u r a t i o n s o f t w a r e a n d u t i l i t i e s
Choices Description
No Select Yes if you are booting a Plug and Play-capable OS.
Yes
No Select Yes if you want to clear the system configuration data during
Yes next boot. System automatically resets to No in next boot.
N/A Enters submenu.
N/A Enters submenu.
1.1 Selects the version of multiprocessor specification to use. Some
1.4 operating systems require version 1.1 for compatibility reasons.
Applies to IDE drives only; refers to the method used to access the
LBA
CHS drive.
Most OSs use logical block addressing (LBA); some use cylinder
head sector (CHS). To verify method, consult OS documentation.
Enabled Enables five-second pause before booting OS.
Disabled
N/A Enters submenu.
Choices Description
Enabled Enables option ROM scan of the selected device.
Disabled
Disabled Enables selected device as a PCI bus master.
Enabled
Default Minimum guaranteed time, in units of PCI bus clocks, that a device
0020h can be master on a PCI bus. Typically, option ROM code
0040h overwrites the value set by the BIOS.
0060h
0080h
00A0h
00C0h
00E0h
Choices Description
Enabled Enables option ROM scan of all devices other than the onboard
Disabled SCSI controllers.
Enabled Enables all devices, other than the onboard SCSI controllers, as a
Disabled PCI bus master.
Default Minimum guaranteed time, in units of PCI bus clocks, that a device
020h can be master on a PCI bus. Typically, option ROM code
040h overwrites the value set by the BIOS.
060h
080h
0A0h
0C0h
0E0h
FT5000 HANDBOOK 7/7