Mitsubishi Electric FT5000 Handbook page 8

Ft series
Table of Contents

Advertisement

S A F E T Y & R E G U L A T O R Y N O T I C E S
Thermalcote bonding compound
The thermal bonding compound used between the system processor and its heat sink can cause skin irritation and stain
clothing. Avoid prolonged or repeated contact with skin. Wash thoroughly with soap and water after handling. Avoid
contact with eyes and inhalation of fumes. Do not ingest.
Ergonomic
When positioning the system unit, monitor and keyboard, take into account any local or national regulations relating to
ergonomic requirements.
Maintenance
Switch off and disconnect all cables before attempting to clean the computer.
Do not use sprays, solvents or abrasives that might damage the system unit surface. Do not use cleaning fluids or sprays near
air vents, ports, or the diskette and CD-ROM drives.
Occasionally wipe the system unit with a soft, slightly damp, lint-free cloth.
Occasionally wipe over the air vents on the rear and sides of the system unit. Dust and fluff can block the vents and limit
the airflow.
Occasionally clean the diskette and CD-ROM drives using a proprietary head cleaner.
Occasionally wipe the monitor with a soft, slightly damp, lint-free cloth.
It is best to use anti-static glass cleaner on the monitor screen, but do not spray glass cleaner directly onto the screen; it
could run down inside the case and damage the circuitry.
Transporting
Use common sense when handling the computer; hard disks in particular can be damaged if the computer is dropped or
handled roughly. As a precaution, back up the contents of the hard disks to tape or diskettes before moving the computer.
Switch off and disconnect all cables before attempting to move the computer, particularly do not try to move the computer
while it is plugged into the AC power supply.
When lifting and carrying the computer, use the metal sides of the system unit and never attempt to lift the system unit
with a monitor still on top.
If you need to transport the computer any great distance, use the original packing materials.
If you are planning to use the computer in another country, it may not be suitable, check with your supplier, particularly on
the availability of the correct AC power cords.
NOTE
Any existing maintenance or warranty agreement may not be supportable in another country. The system may have to be returned
to the supplier.
ii
FT5000 HANDBOOK

Advertisement

Table of Contents
loading

Table of Contents