HP 10500 Series Configuration Manual page 43

Step
3. Configure a network
entity title.
4. Enable the IPv6
capacity for the IS-IS
process.
5. (Optional.) Redistribute
the VPN routes.
6. (Optional.) Configure a
filtering policy to filter
advertised routes.
7. Return to system view.
8. Enter interface view.
9. Enable IPv6 for the IS-IS
process on the
interface.
Configuring EBGP between an IPv6 MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 BGP-VPN
instance view.
4. Configure the PE as the
EBGP peer.
5. Create and enter BGP
IPv6 address family view.
6. Enable BGP to exchange
IPv6 unicast routing
information with the
EBGP peer.
7. Redistribute VPN routes.
8. (Optional.) Configure a
filtering policy to filter
advertised routes.
9. (Optional.) Configure a
filtering policy to filter
received routes.
Command
network-entity net
ipv6 enable
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name | tag tag ] *
ipv6 filter-policy { acl6-number |
prefix-list ipv6-prefix-name |
route-policy route-policy-name } export
[ protocol [ process-id ] ]
quit
interface interface-type interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer ipv6-address as-number as-number
ipv6-family [ unicast ]
peer ipv6-address enable
import-route protocol [ process-id [ med
med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number | prefix-list
ip-prefix-name } export [ direct | isisv6
process-id | ospfv3 process-id | ripng
process-id | static ]
filter-policy { acl6-number | ipv6-prefix
ip-prefix-name } import
37
Remarks
By default, no NET is configured.
By default, IPv6 is disabled.
By default, IS-IS does not
redistribute routes of any other
routing protocol.
If you do not specify the route level
in the command, the command will
redistribute routes to the level-2
routing table by default.
By default, IPv6 IS-IS does not filter
advertised routes.
N/A
N/A
By default, IPv6 IS-IS is disabled on
an interface.
Remarks
N/A
N/A
N/A
N/A
N/A
By default, BGP cannot
exchange IPv6 unicast routing
information with a peer.
By default, BGP does not
redistribute routes from any
other routing protocol.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.